Parkulo guides

Assigned parking spots that tenants respect

A tenant comes home at 11 p.m. and a stranger's car sits in the space they pay for. They call you. You have no idea whose car it is or which spot is theirs. Assigned parking fixes that only if you can answer both questions in seconds. Here is how to set it up so you can.

Set up assigned spots free Free for lot owners. No hardware.

The short answer

An assigned parking spot is a numbered space that belongs to one tenant. It works when three things line up. Every space has a clear name painted on the ground. Every tenant knows their space. Whoever patrols the lot can see which plate belongs in which space.

Parkulo links each spot to a tenant's monthly pass and license plate. You name the spots, pick a spot for each tenant, and Parkulo shows that spot to the tenant, to your staff, and to your patrol. Spot management costs the lot owner $0.

Assigned vs open parking

Most lots use one of two systems. With open parking, any tenant with a permit takes any open space. With assigned parking, each tenant gets one space by name. Each system fails in a different way.

Assigned spots Open parking with permits
Tenant finds a space late at night Always Only if the lot has extra spaces
Spaces used per tenant One, even when the tenant is away Shared, so fewer spaces sit empty
Charge more for better spaces Yes No
Tenant fights over good spaces Rare Common
Work for management Track who has which space Track permits only
Patrol check Plate and space must match Plate must have a permit

The biggest cost of assigned parking is the paperwork. Someone has to know which tenant holds space B-14 today. A spreadsheet goes stale the week a tenant moves. A system that ties the space to the tenant's pass stays current on its own.

When assigned spots make sense

Assign spots when at least one of these is true.

  • The lot runs close to full. If tenants circle for a space after 9 p.m., assigned spots end the hunt. Each tenant knows a space is waiting.
  • Some spaces are worth more. Covered spaces, garage spaces, EV charging spaces, and spaces near the door all earn more. Assigning them lets you charge for them.
  • Tenants complain about each other. Arguments over "my usual spot" stop once the spot is written down.
  • A lease promises a space. Condo deeds, office leases, and some apartment leases name a specific space. You need a record that matches.
  • Large vehicles need large spaces. Trucks, vans, and trailers fit only in certain spaces. Assign those spaces to the tenants who need them.

Open parking works better in one case. If your lot has many more spaces than tenants, assigned spots leave paid spaces empty while other tenants walk farther. Many lots mix both. They assign the premium spaces and leave the rest open.

How to number parking spaces

A good space name tells a driver where to go. A bad one sends a tow driver to the wrong car. Follow these rules.

  1. Use a row letter and a number. Name rows A, B, and C, and number the spaces in each row. A driver who reads "B7" walks to row B and counts.
  2. Number in walking order. Start at the entrance and count away from it. Do not skip numbers, or people think a space is missing.
  3. Add the level in a garage. Use names such as P2-014 for level 2, space 14. Pad with zeros if your signs already do.
  4. Match the paint to your records. The name on the curb, wheel stop, or wall must match the name in your system exactly. "A-7" on the curb and "A7" in your records confuses everyone.
  5. Leave out unit numbers. A sign that reads "Reserved for Unit 214" tells a stranger when that unit is empty. Paint the space number only.
  6. Name special spaces plainly. Use names such as Visitor 1, EV 2, or Loading so their purpose is clear.

Accessible spaces have their own rules under federal and state law. Check those rules before you assign an accessible space to a single tenant.

Name 200 spaces in under a minute

Type a prefix and a range, such as A, 1, and 40. Parkulo creates A1 to A40, keeps your zero padding, and skips names you already have.

Create a free account No credit card needed.

How to price assigned spots

A tenant who holds a space pays for the space, even on nights the car is gone. So an assigned space often costs more than an open permit. Owners commonly set prices in tiers.

Space type How owners price it
Open permit Base monthly rate
Assigned uncovered space Base rate plus a small premium
Covered or garage space The highest monthly rate in the lot
EV charging space Premium rate, plus a plan for power costs

Check what nearby lots charge before you pick numbers. Our guide on how much to charge for parking walks through monthly rates step by step.

In Parkulo, each lot has one monthly rate. To charge different prices, add the premium spaces as their own lot, such as "Elm Street Covered," with a higher rate. Each lot keeps its own spot list.

Paid monthly passes carry a $5 a month Parkulo fee, which the tenant pays on top of your rate. You keep your full rate. Free $0 passes carry no fee, so a building that includes parking in rent can assign spots at no cost to anyone.

How assigned spots work in Parkulo

  1. Turn on monthly passes. Open your lot, go to the Tenant Management tab, turn on Monthly Tenant Access, and set your rate.
  2. Turn on Assigned Spots. The switch sits right under the monthly rate.
  3. Add your spots. Add one spot at a time for names such as Visitor 1, or add a numbered range such as A1 to A40. A preview shows the names before you save. Parkulo lists spots in the order people count them, so A2 comes before A10.
  4. Pick a spot when you invite a tenant. The invite form has a Spot menu that lists only open spots. The tenant's invite email and invite page name the spot.
  5. Assign current tenants from the tenant list. Each tenant row has a spot menu. Pick a spot, and Parkulo emails an active tenant to say which spot is theirs.
  6. Watch the spot grid. Each spot shows Open, Held for invite, or the plate and email of the tenant who holds it. Counts at the top show how many spots are assigned and how many are open.

Tenants see their spot on their Parkulo dashboard next to their pass. They never need to call the office to ask which space is theirs.

Parkulo keeps the spot list accurate with a few firm rules.

  • One pass per spot. Parkulo will not give a spot to a second tenant, even if two staff members click at the same moment.
  • Invites hold their spot. A spot picked for an invite stays held while the tenant signs up, so nobody else gets it first.
  • An assigned spot cannot be deleted. You unassign the tenant first. This stops a tenant from losing a spot by mistake.
  • Turning spots off keeps your work. If you switch Assigned Spots off, tenants and patrols stop seeing spots. Your spot names and assignments stay saved for when you switch it back on.
  • Every change is logged. Adds, renames, removals, and assignments appear in your activity log with who made them.

Someone is in my spot

This call is the reason most owners assign spots in the first place. A clear process keeps it from turning into a feud between neighbors.

  1. The tenant reports it. Ask tenants to report the spot name and the plate of the car in it. Tenants should never block, damage, or tow a car on their own.
  2. Staff or the patrol checks the plate. In Parkulo, open the lot and tap Issue Violation. Enter the plate. If the car belongs to a tenant, the screen shows that tenant's assigned spot in large type.
  3. Compare the spot. The enforcement screen also has an Assigned spots list that shows the plate that belongs in each spot. Search it by spot name or plate.
  4. Cite the car. Choose the reason Parked in an Assigned Spot and attach a photo. The driver looks up the citation online and pays or disputes it.
  5. Tow if your rules allow it. State law sets the rules for towing from private property, such as sign wording and who may authorize a tow. Your tow company should know them.

Sometimes the car in the wrong spot belongs to another tenant. The plate check shows that tenant's own spot, so your staff can see the mix-up right away. A friendly note fixes most of these. Repeat cases can get a citation, the same as an outsider.

Give your patrol or tow company their own login as an Enforcement Agent. Agents can check plates, view the spot list, and cite. They cannot see your payouts or change your settings. Our guide to parking enforcement software covers citations in detail. Parkulo keeps 10% of each paid citation, and you keep 90%.

License plate cameras and assigned spots

Some lots use license plate cameras or their own software. The Parkulo plate check API returns the tenant's assigned spot along with the pass. Your camera system can compare the spot a car sits in with the spot it holds. The API documentation shows the exact fields.

Moves, swaps, and move-outs

Spot lists break when tenants change. Here is how each change works in Parkulo.

  • A tenant moves to a new spot. Pick the new spot from the tenant's spot menu. The old spot opens up at once.
  • Two tenants swap spots. Unassign the first tenant. Give the second tenant the first spot. Then give the first tenant the second spot.
  • A tenant moves out. When the pass ends, the spot opens up on its own. You do not need to clear it by hand.
  • A tenant changes cars. The tenant updates the plate on their pass. The spot follows the pass, so the new plate shows on the spot list.
  • You repaint the lot. Rename spots with the pencil icon. Tenants keep their assignment under the new name.
  • You remove spaces. Delete open spots with the bin icon. Assigned spots must be unassigned first.

Review the spot grid once a month. Look for spots held by invites nobody accepted, and for tenants without a spot who should have one.

Roll out assigned spots in five steps

  1. Paint or sign every space. Make sure the name on the ground matches the name you will enter.
  2. Add the spots in Parkulo. Use ranges for rows and single spots for special spaces.
  3. Tell tenants early. Send a notice two to four weeks ahead with the start date and how to report a car in their spot.
  4. Assign spots. Give current tenants their spots from the tenant list. Each active tenant gets an email naming the spot.
  5. Start with warnings. Leave friendly notices for the first week. Then begin citations.

For community-wide rules, see our guides to apartment guest parking and HOA parking permits.

Frequently asked questions

An assigned parking spot is a numbered space that belongs to one tenant, resident, or employee. Only that person's vehicle may park there. Everyone else parks in open spaces or pays for guest parking.

Assign spots when demand is close to supply, when some spaces are worth more than others, or when residents complain about finding a space at night. Open parking works better when the lot has plenty of extra spaces.

Use a row letter and a number, such as A1 to A20, so a driver can find a spot from its name. Number spaces in the order a person walks past them. Paint the same name on the curb or wheel stop that you use in your records.

Yes. Many owners charge more for covered, closer, or reserved spaces. In Parkulo, put premium spaces in their own lot with a higher monthly rate, and keep standard spaces in another lot.

The tenant reports it to management. Your staff or patrol checks the plate, confirms the car does not belong in that spot, and issues a citation or calls your tow company, as your lease and state law allow. Tenants should not tow cars on their own.

In Parkulo, the spot opens up on its own when the tenant's monthly pass ends. You can then assign it to the next tenant from the spot menu.

Every tenant gets a spot that stays theirs

Name your spaces, assign them to monthly passes, and let your patrol see which plate belongs where. Parkulo costs the lot owner $0.